Deys Fabricating Ltd. - Latest Comments

Re: Measuring an Aboveground Pool for a Replacement Liner

swimming pool liners — Mon, 23 Apr 2012 12:47:05 -0000

On the other hand, your pool may be designed for overlap pool liners. These liners are installed by removing the pool's top rail and draping the liner's fabric over the walls. Plastic clips are then used to hold the liner in place along the top of the wall. Once that is done, the top rails are replaced. If there is excess liner hanging down on the outside of the pool walls, it can simply be trimmed off. If your above ground swimming pool is meant to accommodate an overlap liner, you should be able to see the liner hanging down on the outside of the pool if you look under the top rail.

Re: New Patterns For 2012

swimming pool liners — Sat, 31 Mar 2012 10:30:40 -0000

Do you know the difference between fiberglass and concrete lined pools? Fiberglass (rather above ground or underground) pools are made from reinforced plastic containing fiberglass molded into the shape, size or color of your choice or available space. Concrete may be used with fiberglass pool installation to keep the molded fiberglass in place throughout its lifetime. Concrete lined pools use a concrete mixture that is either sprayed or poured onto the steel reinforcement and allowed to set. The contractor will either apply plaster inside the pool interior or use a vinyl liner over the concrete. Clients also have a choice of gunite, poured concrete and masonry block pools which all involve concrete construction of some sort.

Re: 2011 Canadian Pool Expo

in ground pools — Fri, 30 Mar 2012 22:59:56 -0000

Choosing a pool can be overwhelming, but we take the
guesswork out of the selection process. Our design specialists help you
determine the best pool for your backyard, skillfully construct and install
your pool, and provide exceptional service long after you take that first dip.
The entire experience revolves around what you want and need-and we work
diligently to exceed your expectations.

Re: New Inground Vinyl Patterns for 2010

swimming pools nashville — Tue, 31 Jan 2012 20:29:51 -0000

It is so hard to pick a liner. We have been shopping for a new liner, and we can't seem to pull the trigger on one. These are great designs, but we all know that they look much different under water. Do you have them on display somewhere?

Re: Pump Sizing

above ground pools nashville — Mon, 30 Jan 2012 20:14:25 -0000

This past summer I had a hard time getting the water right, and I attributed it to a worn out pump. I have been considering getting a new, larger pump. After reading this, I might reconsider. I have spent some time this winter looking online for pumps, but now I'm going to have to change my search.

Re: Measuring an Aboveground Pool for a Replacement Liner

swimming pools nashville — Sun, 29 Jan 2012 16:09:34 -0000

This is great tips on how to measure the liner. For above ground pools, the liner is going to have to be replaced. This is something that a homeowner can do themselves, and with this info, it will be an easier process.

Re: Plumbing Your New Pool

pool installation cost — Tue, 18 Oct 2011 10:55:19 -0000

I'll
post the same information to my blog, thanks for ideas and great article.

Re: Measuring an Aboveground Pool for a Replacement Liner

billdeys — Thu, 13 Oct 2011 14:56:38 -0000

Liner Manufactures use Radio Frequency Heat Sealing to "weld" liners together. The machines are not portable and can't be used in the field. The material also can't be in any way dirty, the RF is extremely sensitive. In the field there are glues that can be applied otherwise heat sealing, using a hot air gun, is the only option. Either way you might want to test the application first. In my experience vinyl holding air doesn't work that well.

Re: Measuring an Aboveground Pool for a Replacement Liner

Northcrestlanes — Thu, 13 Oct 2011 14:38:23 -0000

how do I bond two sheets of pool liner together to make it air tight?
What heat equipment do I need to fuse the liner?

Re: Water Business

pool liners — Mon, 01 Aug 2011 09:48:52 -0000

Please
give me more information. I love it, Thanks again.

Re: Plumbing Your New Pool

Carl M — Tue, 19 Jul 2011 21:42:07 -0000

Yes, bigger pipes can be beneficial, and your installer should be able to advise you on the diameter of pipe required for the flow you need for your pool.

Re: Salt Water Misconception

resistance pool — Thu, 16 Jun 2011 14:06:59 -0000

Great! Thank for information, I'm looking for it for
a long time,

Re: Measuring an Aboveground Pool for a Replacement Liner

above ground pool installation — Fri, 10 Jun 2011 05:46:12 -0000

Great! Thank for information, I'm looking for it for
a long time,

Re: Salt Water Misconception

Lyle Lambie — Mon, 02 May 2011 14:22:57 -0000

I understand a lot of communities are trying to ban the use of salt water systems as they are much more aggressive to the environment than initially conceived. Have you heard this to be true .... if so , what are your beliefs ?

Re: Measuring an Aboveground Pool for a Replacement Liner

randy — Tue, 26 Apr 2011 20:15:21 -0000

how do we measure the thickness

Re: Plumbing Your New Pool

Plumbing — Thu, 31 Mar 2011 08:54:39 -0000

One of the places where a family could have their recreational activity together is on the pool site. We should always consider the facts about the functions on a pool to save a lot of time and money. Regular and proper maintenance is a must to have a good plumbing system.

Re: New Inground Vinyl Patterns for 2010

Lamba — Mon, 07 Mar 2011 14:10:46 -0000

I live in Tanzania in East Africa. I am looking for 3 DIY liner Pools. 1. 12.0 x 4.50 meter 2. 10.0 x 5.0 meter (both 1.2 meter deep on shallow& and 1,8 meter deep on deep end) 3. Kidney 9.0 x 5.0 meter. Can you quote the prices with complete equipment, pumps, filters, electricals etc etc for 240 volts

Re: New Inground Vinyl Patterns for 2010

Lamba — Mon, 07 Mar 2011 14:07:50 -0000

I live in Tanzania in East Africa. I am looking for 3 DIY liner Pools. 1. 12.0 x 4.50 meter 2. 10.0 x 5.0 meter & 3. Kidney 9.0 x 5.0 meter. Can you quote the prices with complete equipment, pumps, filters, electricals etc etc for 240 volts

Re: Salt Water Misconception

billdeys — Thu, 01 Apr 2010 10:04:43 -0000

The ring your talking about is called Coping and we've not heard of
issues. Especially if the pool is bonded there shouldn't be an issue.

Re: Salt Water Misconception

howardwalker — Wed, 31 Mar 2010 23:15:48 -0000

What about the ring around an inground liner pool (that holes the liner in place) will the be affected - it is made of Alluminum

Re: Pump Sizing

sanjaybhalla — Mon, 19 Oct 2009 08:29:27 -0000

We are looking to fabricate an above ground pool with steel frame & vinyl liner, size 17'x9'x3.5'. Can you provide an offer & a comment on technical limitations, possibilities & any other suggestions. This will need to be cut in places for filtration, heating circuits, skimmers etc & also swimn jets ( counter currents ). We are based in Delhi, India & looking forward to an association on long term.Pl have your international sales team respond urgently. Thanks

Re: Salt Water Misconception

billdeys — Mon, 15 Jun 2009 10:03:13 -0000

The liner and plumbing in most cases is all plastic or PVC so "salt
water" poses no risk. In some cases things like heat exchangers in
your pool heater can be effected but if the salt system is installed,
operated and maintained properly there is little risk. The items that
usually have problems, metals like that heat exchanger and a ladder,
can usually be upgraded to a type that is resistant to the
electrolysis introduced by a slat water chlorine generator. In the
case of a ladder it's even easy to swap out for a plastic one!

On Mon, Jun 15, 2009 at 9:55 AM,

Re: Salt Water Misconception

Linda — Mon, 15 Jun 2009 09:54:04 -0000

I was told that a salt water system for an inground vinyl liner pool would damage the pool and the plumbing. Is this true?

Re: Welcome to the brand new DeysFab.com!

Greg Fowler — Thu, 11 Jun 2009 22:00:13 -0000

Congrats on the new look. Good job.

Re: Welcome to the brand new DeysFab.com!

B. Carty — Mon, 08 Jun 2009 09:51:04 -0000

Just bought a Deys liner for my 24-ft pool and found your website. I just wanted to suggest an online registration option instead of the mail-in card.